The Importance of Colors of Underground Utility Lines

It is now easier to know what an underground utility line is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. The OSHA requires that utilities underground first be located before digging through a piece of land. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

It is easier to identify underground utility lines today because they now use different colors for each utility. The colors below indicate the kind of utility uses it.

Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.

Temporary survey markings use pink lines. Surveyors use pink lines to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

Click here now if you want to learn more about the color coding of utility lines. You can view here for more.

Similar Posts